top of page

Universal Multi-Mount

For use with most Cat 1 quick hitches. See details below.

NOT compatible with
John Deere iMatch

Critical base bracket dimensions are noted in the adjacent drawing. Compatible quick hitches must have a top link bracket outside dimension of less than 2.75" and available material for the retaining pin hole 2.25" above the center of the top link pin. 

IMG_0892 2_edited_edited.jpg

Complete Kit

​​

Base Plate

  • (1) High-Strength Grade 8 pin bolt

  • (4) 5/16” x 1.25” High-Strength Grade 8 mounting bolts

  • (5) 5/16” High-Strength Grade 8 nuts

  • (9) 5/16” flat washers

  • (4) 5/16” x 1-1/2” fender washers​​

 

Base Bracket​​

  • (1) retaining pin

  • (1) nylon washer

  • (1) pin clip

  • (1) 9/64" drill bit

  • (1) centering guide

 

Otis Innovation decal

Installation instructions

IMG_0876 2_edited.jpg
Tools required for installation:
  • Drill
  • 5/16" drill bit (new or sharp)
  • ​1/2" wrenches
bottom of page